Pulse Oximeter

The YM102 Fingertip Pulse Oximeter is designed to provide a simple and efficient way to monitor blood oxygen saturation (SpO₂) and pulse rate. The device clips comfortably onto a fingertip and displays the measurement results on a bright 1.5-inch red LED screen.

Its clear display supports two viewing directions, allowing the readings to be viewed conveniently from different angles and under various lighting conditions. The device offers a declared SpO₂ accuracy of ±2% within the 70%–100% range.

With its compact construction and lightweight 28 g design, the YM102 is easy to carry and convenient to use at home or while travelling. It may also be used for general health monitoring, sports recovery, and clinical observation, as directed by a healthcare professional.

The device is powered by two AAA batteries and includes a detachable lanyard for convenient carrying and accessibility.

• Measurement Parameters: Measures blood oxygen saturation (SpO₂) and pulse rate.
• Display Type: Clear 1.5-inch red LED display.
• SpO₂ Accuracy: ±2% within the 70%–100% measurement range.
• Display Direction: Two-directional viewing option for convenient reading from different angles.
• Response Time: Provides rapid and efficient measurements.
• Operation Mode: Practical fingertip clip design for easy positioning.
• Product Dimensions: 57 × 30 × 31 mm.
• Net Weight: Only 28 g, making it lightweight and easy to carry.
• Power Supply: Powered by two AAA batteries.
• Ease of Use: Simple one-button operation with clearly displayed results.
• Portability: Compact design suitable for home use and travel.
• Suitable Applications: Home health monitoring, sports recovery, clinical observation, and travel.
• Practical Accessory: Includes a detachable lanyard for convenient carrying and storage.

• The Pulse Oximeter is intended for the non-invasive measurement of blood oxygen saturation (SpO₂) and pulse rate in adults and children.
• It is suitable for home monitoring, sports recovery, clinical observation, and travel but is not a substitute for professional medical assessment.

1. Insert two AAA batteries, observing the correct polarity.
2. Place one finger fully inside the device, ensuring secure positioning and proper contact.
3. Press the power button and wait for the LED display to illuminate.
4. Keep your hand still, avoid talking or moving, and breathe normally during the measurement.
5. Wait until the readings on the display stabilise.
6. Read the displayed blood oxygen saturation (SpO₂ %) and pulse rate (bpm).
7. Remove the device from your finger after use, then switch it off.
8. Clean the exterior when necessary and store the device in a cool, dry place.

• 1 × Pulse Oximeter.
• 1 × Carry Lanyard

• This device is intended for monitoring only and is not a substitute for medical diagnosis or professional advice.
• Keep your hand and finger still during measurement to obtain an accurate reading.
• Nail polish, artificial nails, or cold fingers may affect measurement accuracy.
• If an unexpected reading appears, repeat the measurement and consult a healthcare professional if it persists.
• Do not immerse the device in water. Children should use it only under adult supervision.

• Clean the device and store it in a cool, dry place away from heat, moisture, and direct sunlight.
• Protect it from water and impact, and remove the batteries if it will not be used for an extended period.
• Keep the device and batteries out of the reach of children.